Product Introduction

Aluminum ion electrochemical sensor test strip (customized - cleaning tank liquid reagent monitoring)

I'd like a quote.

In order to allow production line personnel to regularly monitor the aluminum ion concentration in the tank liquid during shift changes to ensure product quality, the customer needed a tool that was easy to operate and could quickly and accurately quantify the concentration for production line personnel to use. Therefore, the customer cooperated with Ruizhun Technology to develop this high-concentration aluminum ion sensor.

The M series test strips introduce key technologies of biomedical blood glucose test strips, integrating electrochemical three-electrode system, microfluidics and drug coating technology on each sensor. Using a consistent production process, the quality of each tube sensor test strip is strictly controlled, and laboratory ppb-level detection can be achieved within a few minutes. With the portable electrochemical metal ion detection system MAS G1, users do not need complicated pre-treatment and calibration procedures, and do not need to worry about sample cross-contamination or interference caused by human operation, and can obtain the most real-time data in a highly efficient way.


  • SPECIFICATION

      model
      This product needs to be customized according to customer needs
      model
      Al-MC020200
    Detection species Trivalent aluminum ion
      length
      30 mm
      width
      12 mm
      Microchannel volume
      25 uL
      Calibration line concentration range
      20-100 mg/L
      Minimum detection limit
      10 mg/L
      Analysis time
      70 seconds

      length
      30 mm
      width
      12 mm
      Calibration line concentration range
      Depends on the lowest concentration that the customer wants to detect
      Minimum detection limit
      Customization
      Analysis time
      Customization

Technical Information


Different concentrations of aluminum ions (20-200 mg/L) were added to the process cleaning agent bath, and the aluminum ion sensor test piece (Al-MC020200) was used with the electrochemical metal ion detection system (MAS G1) for detection. The obtained aluminum ion current signal (Current) and the added aluminum ion concentration (mg/L) were subjected to regression analysis, and the R2=0.9813 showed that the measured value had a good correlation with the actual concentration in the reagent, which can help customers grasp the bath liquid quality in a short time on the production line and ensure product yield. *Aluminum is an amphoteric substance. This aluminum ion sensor test piece is divided into two types, suitable for acid and alkaline environments respectively. The calibration line concentration range is set according to customer needs.


FEATURES

  • No need to add pre-treatment reagents, just dip the test piece in the water sample
  • No need to build a calibration line
  • Equipped with microfluidic reaction tank, which is pre-coated with reaction reagents (non-controlled toxic substances)
  • Only one drop of sample required
  • Electrochemical three-electrode system detection (non-optical method)
  • The material of the test piece is recyclable and will not cause any environmental burden


ACCUSENSING's metal ion sensor improves the existing on-site water quality rapid screening tools/instruments on the market that have no numerical values when detecting heavy metals, require pre-treatment with chemicals, are cumbersome and time-consuming to operate, and are inconvenient to carry. After continuous research and development, improvement, and real factory water sample testing, the product has been adopted by well-known domestic and foreign customers such as the Environmental Protection Administration of the Executive Yuan, Nan Ya Technology, a semiconductor manufacturer under the Formosa Plastics Group, Yongqiang Co., Ltd., a well-known electroplating company in the north, and MAPUA University in the Philippines.




Other equipment products

Sort or filter